Fuel Economy

Your source for all vehicle accessories.

Edmonton Vehicle Accessories & Parts

FFI International

MPG-Caps are pills developed by FFI that you place into your gas tank when you fill up at the gas station. These pills once dissolved into your gas (takes about an hour) and ran through your system give you: Better Gas Mileage, Increased Performance & More Horsepower, and Lower emissions levels. For some cars it takes up to the third tank of using these pills to see results. Increases in mileage range from 7-14%. MPG-CAPS are 100% Organic, and is essentially an engine conditioner that improves fuel economy and power.

The chemicals from the MPG-Caps produce a catalytic coating in the combustion chamber. This catalytic coating provides an infinite nano-phase surface area for the catalyst to deposit on. This catalytic coating causes a catalytic reaction to occur in its presence. So now we utilize the fuel to carry the MPG-CAP, in its dissolved state, to the combustion chamber, where the heat of combustion activates the chemical compound, and creates a very thin coating on the metal surfaces of the internal components within the combustion chamber.  What this catalyst does, is cause a change in what is called the “in-cylinder rate shaping” of the combustion. This, in turn, provides for a 30% increase in pressure on the down stroke of the piston, in a time frame slightly altered from a non-catalyzed state. This results in the improved performance.

Gas King

This pulsing system produces an additional 1.5V of additional peak Ac current carried through the battery, to the ignition coil, and finally to the ignition system. Gas King will give you Fuel Savings by using pulse technology, Gas King provides increased combustion in the engine resulting in fuel savings 5 – 25%. Gas King provides more power with increased combustion resulting in added power. Gas King also lowers emissions. It gives your vehicle a more complete combustion and resluts in less wasted fuels released into our environment.

Gas King will also increase your batter life up to 200%! It will provide easier start ups in extreme colds or extreme hot weather conditions as well. Older vehicles will be revived with Gas King. The headlights will be brighter, A/C is cooler, and the engine will run smoother. Very easy to install (less than 5 minutes) and has a product life of 5-10 years, meaning it can easily be moved to your next vehicle. Gas King is compatible with all 12V gasoline vehicles. For motorcycles, it is recommended to install on motorcycles over 250CC (smaller engines will not see benefits). On gasoline engines, best results are found on vehicles with engine sizes less than 5L and older than 2 years of age.

Edmonton Vehicle Accessories & Parts
Edmonton Vehicle Accessories & Parts


A mess free way to clean and improve your engine performance with fuel treatment, fuel injector cleaner, octane booster, fuel stabilizer and even something to keep you windshield clean.

Dyno-tab® Fuel Treatment is a safe, fast dissolving fuel additive in tablet form that is made from 100% active ingredients. Fuel additives have been around for a while but most of them add their dry components to a liquid carrier such as paint thinner, other solvents or even jet fuel! This concoction is then bottled and sold to the consumer. The typical liquid additive contains less than 10% active ingredients. Dyno-tab® eliminates the fluid carrier and dramatically reduces transportation costs, storage requirements, packaging waste and the uncertainty of adding liquid carriers that may not be so great for your engine. Essentially, Dyno-tab® is a ‘combustion catalyst’ and when added to fuel produces a hotter, cleaner and more complete fuel burn. Piston expansion is greater and the result is more power from the same amount of fuel.

In addition, Dyno-tab® inhibits the buildup of carbon deposits on combustion chamber and exhaust valve surfaces, which rob your engine of power and performance. Dyno-tab® is added directly to your fuel tank at fill-up where it dissolves quickly. When used according to directions, Dyno-tab® will: Improve Fuel Economy, Increase power and preformance, boost octane, eliminate “knock” and “ping”, redice smoke and exhaust emissions, inhibit carbon deposits, act as a lead substitute. Dyno-tab® is registered with the EPA and is safe for all gasoline and diesel engines. It will NOT harm catalytic converters of oxygen sensors.

Fuel Catalysts

Fuel catalysts are products that are dropped into the fuel tank or inserted into the fuel line, and claim to improve fuel quality, and therefore power and economy. Different products work in different ways, but the basic premise is that the fuel catalyst will alter the combustion process due to the presence of microscopic particles of special chemical compounds from the catalyst. While some devices are able to substantiate their claims with data that shows an improvement in performance and economy, there are still some that do not, as the results often vary depending on type of car, whether the car is well-maintained, and also driving style. The wide variety of such products means that some do actually help improve fuel economy under the right circumstances, stop by AeroCarParts today to find out more about fuel catalysts.

Edmonton Vehicle Accessories & Parts
Edmonton Vehicle Accessories & Parts

Performance Enhancers

Most of the time you will purchase a standard vehicle , as an already ‘performance enhanced vehicle’ just costs too much money upfront, or has not been enhanced in the exact way you prefer. Your first option is to customize and upgrade your vehicle according to your specific needs and budget , but more often than not you just do not have the skill to do this enhancement   yourself. This is when it is a much better option to have a professional company like Aero Car Parts provide the expertise that you need to get your car tuned as you want it. Performance enhancer is available for all makes and models to increases H.P. torque and fuel economy.

Air Intakes

Air intakes work on the same basic principle as air filters, that is, to shove air into your engine. Of course, air intakes do not offer filtration functions, so they are purely a performance enhancing addition. Theoretically, the more air intakes fitted, strategically positioned at the appropriate areas such as at the radiator or on top of the bonnet, the more air enters the car’s system, and once again, results in better combustion and improved performance. Hence why you see performance cars with air scoops on the bonnet, in the bumpers, and at the radiator grille. Like air filters, aftermarket air intakes have been proven to be able to improve performance, but having them installed correctly is crucial in order to extract maximum performance gains.

Edmonton Vehicle Accessories & Parts
fuel economy

Air Filters

The basic function of an air filter is to prevent dust and other harmful particulate matter from entering the engine’s cylinders. They are a necessary part of your car’s engine, but can also be performance enhancing. How? Air filters can also act as a magnifier, forcing air into the combustion chamber while performing their job of blocking out harmful matter. As air is needed in the combustion process, having more air results in better combustion, and hence improved performance. There are two types of air filters available, the open pod type and the drop in type. Drop in filters are easier to fit, requiring just a simple swap with the existing filter, and are most beneficial to automatic cars as they can work at low revs. Open pod filters however requires the removal of the whole standard air intake to install, and work best with manual cars, as they generally need higher revs in order to work optimally. The performance enhancing benefits of aftermarket air filters are well-known, but whether these gains are substantial again depends on the type of filters used as well as driving style. Aftermarket air filters also trade off their filtration benefits at the expense of improved air consumption, so regular maintenance to clean the air filters is necessary.

Power Chips

Power chips are products that are “tagged” onto the engine that promises to increase power, as well as improve fuel economy. One example is the Sixth Element T1 Power Chip, which is fitted onto the water pipe of the car’s radiator system. Using German quantum technology, the T1 Power Chip bringing down the running temperature of the engine by about 4 to 5 degrees Celsius. Sixth Element claims that this will help improve fuel consumption by 5 to 7%, increase the engine’s low speed torque and horsepower, as well as generate lower running temperatures overall for the car, preventing overheating. Sixth Element also features another product which promises to reduce fuel consumption further, namely the Power Bar V1s. This device is plugged into the car’s cigarette lighter socket, and promises marginal increases in horsepower in seconds. The product works using quantum science, breaking the ions into smaller particles, and rearranging them into a more compact arrangement. By strengthening the signal transmitting into the free electron microchips that are present in the transmission system, thereby resulting in more efficient gearshifts and better fuel economy.


FFI MPG-CAPS™ Combustion Analysis

By Jerry Lang

Jerry Lang

Jerry  Lang  has  more  than  40  years  of   combustion  experience  and  a  strong background  in  refining  processes.  As the  owner  and  operator  of  Jerry  Lang  Combustion  Consulting,  he  is  currently  designing  and  overseeing  combustion projects  for  four  refineries,  including  efforts  to  lower  emissions  and  improve efficiencies. Mr. Lang has served as a combustion consultant to virtually all of the major oil  companies  and  95%  of  the  refineries,  including  ChevronTexaco,  Chevron  Phillips,  ARCO,  Shell,  Kraft,  Exxon,  Mobil,  and  Dow  Chemical. At  Exxon,  Mr.Lang  developed  ways  to  improve  efficiency  by  retrofitting  the  tankers  of  the company. He also served as the combustion auditor to Chevron on their Richmond Nitrous  Oxide  (Nox)  Reduction  Project,  worth  in  excess  of  $300  million.

In addition, Mr. Lang has completed projects in Norway and is currently contributing to an ongoing project in Qatar. In  1967,  Mr.  Lang  established  his  own  business  where  he  developed  and patented several products related to combustion and incineration. He also served as Manager  of  Combustion  Systems  for  Howe  Baker  Engineers  where  he  helped develop  ways  to  improve refining  operations.  Mr.  Lang  was  also  recruited  by  Dr. Edward Teller, the primary developer of the hydrogen bomb, for four years on an alternate fuels project doing combustion tests. Mr. Lang has extensive experience designing equipment utilized in reducing emissions  from  stationary  sources  such  as  refineries,  power  plants,  and  industrial operations.  He  also  contributed  to  the  development  of  the  equipment  used  during  the  clean  up  of  the  Alaska  oil  spill.  Over  the  years  he  has  also  done  work  on systems  to  improve  mileage  in  automobiles, such  as  installing  a  vaporizer  in  the exhaust to vaporize the gasoline prior to intake and working on steam injection in automobiles. Mr.  Lang  holds  17  patents,  including 13  combustion-related  patents.  Three of his patented emission reduction processes have been sold all around the world. He holds a B.S. in Mechanical Engineering. 


I  became interested in the MPG-CAPS™ being marketed through FFI because of my past 40 years experience in the Combustion  and refining industry. One of my employees brought the product to me, and I was immediately skeptical because of my past experience with  products making  similar claims. I have seen and tested numerous fuel additives that claim to clean engines, increase performance, and increase fuel mileage. Many claim  to  lower  emissions in burners. I have been a developer of combustion products for years and have patented several burner and combustion related technologies. My technologies are used extensively in the petrochemical, industrial, and commercial markets worldwide. I have personally tested several  ideas  with  the  specific intent of increasing efficiency in gasoline and diesel engines. My initial intent was to disprove the MPG-CAPS™ claims. I have emission tests and other equipment in my facility. 

I was surprised when I first tested the vehicle of my employee who was using the MPG-CAPS™ and compared it to my identical vehicle without the MPG-CAPS™. I found a surprising reduction of emissions on the vehicle using the MPG-CAPS™. My employee wanted me to use the MPG-CAPS™ in my truck, but I decided to monitor my mileage and emissions to get a baseline first. After closely monitoring my mileage and emissions for about 1000 miles, I started using the MPG-CAPS™ as specified. At the conclusion of 1000 miles, my truck was getting 14% better mileage, and emissions were reduced by almost 75%. This result did get my attention, so I started an extensive research effort on the product. My conclusion based on my own testing, combusting experience, and research is that the product clearly does work and is scientifically and technically sound. The following is my explanation of the product from a combustion expert’s viewpoint. I did sign a nondisclosure agreement with the manufacturer and owner of the technology in order to get information for this paper and cannot disclose any trade secrets. I will attempt to describe the product and process in a way that will help to reduce confusion and answer critics.

What is it?

The basic technology involves organometalic chemistry. Organometalic discoveries date back to the 1800’s when an ethylene complex of platinum was prepared, and metal carbonyl, tetracarbony nickel was synthesized; however, the structure of such complexes was difficultto deduce using chemical methods of that day. With the 1950’s development of NMR and single crystal x-ray diffraction, methods were then available to solve the structures of these complexes.

With the advent of computerization, a rapid growth in the study of organometallic compounds ensued. By the 1970’s, organometallic compounds were being used as burn rate accelerators for solid fuel rockets. The Nobel Prize 1974 was awarded to Earnst Fisher and Geoffrey Wilkinson for their contribution to the field.

The development of these complexes for use in internal combustion engines has always been a scientific goal. As is found in any developing technology, you will find periods of success and times of less activity. The MPG-CAPS™ compound is the result of space-age continuation of a proven technology in its latest stage.

How Does it Work?

The MPG-CAPS™ compound uses the fuel (gas or diesel) as a carrier to deliver it into the engine combustion chamber where it actually does its work. The ingredients in the MPG-CAPS™ are used to treat the combustion chamber metal surfaces. A film is formed on all the surfaces. Technically, the film is thermally derived oxidation. The carboxylic metal creates an oxide residue on the hot surfaces at the time of combustion.

A simple similar example of this is the scorching of a pan when cooking. We are all familiar with how a residue from cooking will form a layer on a pan if the food is overheated. In most cooking cases, the amount of material oxidized is of sufficient quantity to form a heavy film. However, if you scrub the pan many times, the film will get so thin that all you see is discoloration with a film so thin it appears to be part of the pan impregnating the pours of the metal.

The high temperature in the cylinder of an engine combined with the small amount of material that will oxidize or carbon out produces a very thin layer very rapidly. This film coats the walls of the cylinder, the piston face, and the fire deck.

Once this film is deposited, it provides several benefits. First, it changes the surface heat absorption characteristics of metal. Note: The greatest loss in efficiency in an automobile engine is the loss of heat. Heat is energy released by the fuel, and air mixture as it burns producing a heat spike, which creates expansion used to drive the piston down. The cylinder walls and head are water cooled, and the piston is oil cooled. The film inhibits the transfer of radiant heat. This means higher combustion temperature, greater expansion, and more power. The second positive effect of the film is the provision of a surface to more evenly distribute the fuel. A polished surface tends to cause beading as a polished paint job. The micro film attracts the liquid fuel. More even fuel distribution better shapes the charge yielding more power. The third work of the film is being acatalyst precursor to react with the catalyst component in the MPG-CAPS™. With the temperature in the cylinder and the presence of the catalyst, a catalytic reaction occurs to promote better disassociation of chemicals and better burn. The catalytic reaction is also exothermic and produces heat. The combination of all the above produces 30 to 40% more expansion in the cylinder with an equal amount of fuel.

Changes in the automotive industry in the last 15 years have increased fuel efficiency. The EPA has mandated rules to lower emissions. Fuel manufacturers have removed lead and added oxygenates to fuel. These changes have caused modern vehicles to build harmful deposits that tend to soak up the fuel and cause performance problems. The MPG-CAPS™ provide a micro-thin coating that inhibits build-up of harmful deposits.

An added benefit of using the MP G-CAPS™ is lower emissions. The catalytic process found in catalytic converters on exhaust systems is started in the firing cylinder, which reduces the formation of nitrous oxides (NOx). The work required by the converter is reduced, and life of the converter is extended.

The film produced on the cylinder walls is a continuous process and is polished by the rings on the piston becoming a more durable surface than the original metal. Less wear will occur, and extended engine life should be the result.

In summary, I found many positive effects in using the MPG-CAPS™. I found no negative effects. Since most automobile engines burn fuel at over 99% efficiency, it is impossible to improve the combustion alone. However, by using more heat of combustion, shaping the burn, and using the catalytic process to start the reaction and disassociation of chemicals usually driven by heat, a more efficient burn is produced. A burn is produced that will provide more expansion in the cylinder, therefore requiring less fuel.

It is my opinion that the greatest positive effect is the fact that more heat produced by the combustion is being used. The extra heat causes greater expansion of gases, increasing power, and overall efficiency of the engine. Most fuel is burned to use the heat. In an automobile, the heat is basically wasted. In my past experiments and testing, I have proven heat recovery to be the only practical way to improve gas mileage on a modern engine. The process produced by the MPG-CAPS™ does use more of the heat generated, and the catalytic process produces additional heat. The use of FFI MPG-CAPS™ is a practical way to improve mileage, increase power, and extend engine life.

Jerry Lang Test Procedure

In order to eliminate variables the following procedure was used.

1. I established a baseline miles per gallon number for highway driving. I drove the 1998 Mercedes on highway trips only for 1313 miles.

2. I established a baseline miles per gallon for city or short trip driving. I drove the 1998 Mercedes in city and short trips for 1051 miles. It was established that my baseline miles per gallon were 26. 18 for highway and for city it was 18.72.

3. I conditioned the car for 1620 miles prior to testing.

4. I started my first test with a full tank of gas and drove 273 miles and recorded highway and city driving. (200 highway and 73 city). I added 10 gallons of gas at this point. I repeated this procedure three more times as shown in the chart. I then drove 261 miles as shown and filled the tank. My reason for following this procedure was to minimize the fill up errors.

During this test I drove a total of 1420 miles and used a total of 54.32 gallons of gas. That is an average of 26.14 miles per gallon. In order to compare this to my baseline mileage I used the following procedure.

980 miles of the 1420 were highway so 980 divided by 26. 18, which was my baseline mileage for the highway, equals 37. 43 gallons of gas. 440 miles of the 1420 were city type so 440 divided by 18.72, which was my baseline city mileage, equals 23.50. The total baseline gallons would have been 60.94 without the MPG-CAPS™. The average mileage without the MPG-CAPS™ would have been 23.30 miles per gallon.

The number 2 test was conducted in the same manner. The average miles per gallon was 23.63 but after you do the calculations you still see around 12% savings in fuel or miles per gallon.

– For Charts Mentioned in the above, please see the following PDF

FFI – MPG-CAPS Combustion Analysis Credit To Jerry Lang

We're Ready to Help!

Question? Looking for something? We're here for you!

We love helping people just like you find what they’re looking for.